Product Description
Overview
\n
\n
\nThe PGXD14 Wireless Guitar System for guitar or bass features a PGXD4 wireless receiver, PGXD1 bodypack transmitter, and a WA302 instrument cable. Combined, they add the clarity of 24-bit digital audio to the legacy of trusted Shure microphone options for wireless performances.
\nThe rugged PGXD1 bodypack transmitter easily clips onto a belt or guitar strap, and provides you with a 20Hz - 20kHz frequency range, up to 10 hours of continuous use on 2 standard AA batteries (not included), and 200' of wireless freedom. \n \nThe PCDX4 receiver offers 24-bit/48kHz accurate sound, auto frequency selection, and greater reliability thanks to its true digital diversity. \n \nThe WA302 instrument cable plugs into guitar, bass, or any other 1/4" line-level instrument output. \n \n \nConsumer Alert:
\nMost users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC's wireless microphone website at: www.fcc.gov/cgb/wirelessmicrophones. \n
\n
\nFeatures
\nPGXD1 transmitter with WA302 Instrument Cable \n-
\n
- Rugged, compact bodypack with belt clip and instrument cable \n
- 20Hz - 20kHz frequency range captures every nuance of your tone \n
- Power, mute, and battery status LED \n
- Up to 10 hours of continuous use from 2 AA batteries \n
- 200' (60m) operating range \n
- 26dB of continuously adjustable gain to match variable input levels \n
-
\n
- 24-bit / 48kHz digital technology for incredibly accurate sound \n
- Automatic frequency selection locates a clear channel instantly \n
- One-touch sync automatically syncs the transmitter and receiver \n
- True digital diversity delivers rock-solid wireless signal reliability \n
- Up to 5 systems can be used at once \n
- 1„4" and XLR audio outputs \n
- Included padded carrying case for portability and protection \n
Specifications
\n
\n
\nPGXD1 transmitter with WA302 Instrument Cable
\n
\n-
\n
- Audio input level: +10 dBV maximum, at minimum gain setting -16 dBV maximum, at maximum gain \n
- Gain adjustment range: 26dB \n
- Input impedance: 1MÎ \n
- RF Output Level: 10 mW maximum (dependent on applicable country regulations) \n
- Dimensions (HxWxD): 108mm x 64mm x 19mm (4.25" x 2.50" x 0.75") \n
- Weight: 128g (4.5oz.) without batteries \n
- Housing: Molded polycarbonate case \n
- Power requirements: \n
- Battery Life: Up to 10 hours \n
-
\n
- Dimensions (HxWxD): 40mm x 181mm x 104mm (1.6" x 7.125" x 4.1") \n
- Weight: 289g (10.2oz.) \n
- Housing: ABS \n
- Audio Output Level (ref. ±38kHz deviation, 1kHz tone): XLR connector (into 3000Î load): -2.5dBV 1/4" connector (into 10000Î load): +10 dBV \n
- Impedance: \n
- XLR: 50Î \n
- 1/4": 50Î \n
- Sensitivity: -102 dBm @ 10-5 BER \n
- Image rejection: > 70dB, typical \n
- XLR output: \n
- Impedance balanced Pin 1: Ground (cable shield) \n
- Pin 2: Audio \n
- Pin 3: No Audio \n
- Audio LED: \n
- Red: 2dB below clip \n
- Amber: 12dB below clip \n
- Green: 50dB below clip \n
- Power Requirements: 12-18 Vdc at 150 mA, supplied by external power supply \n
- Pin Assignments: XLR: 1 = ground, 2 = hot, 3 = cold 6.35mm (1/4") TRS: Tip = audio, Ring = no audio, Sleeve = ground \n
Pro Coverage
\n
\n
\nManufacturer's Warranty
\nOne year warranty on wireless mics, mixers, and circuitry products.
\n2 year warranty on wired mics.
\nWarranty terms vary. Check with manufacturer for specific product warranty.
\nsearch terms: shure pgxd14, pgxd14, shure wireless bass, shure bass wireless
\n
