Sennheiser EW IEM G4 TWIN In-Ear Monitor System
\nThe Sennheiser G4 TWIN in-ear monitoring system makes your gig an extraordinary experience -- not just for your audience, but also for you. This IEM system includes one half-rack transmitter, and two bodypack receivers with earphones, for sending the same monitor mix to two performers.
\n
What's in the Box:
\n- SR IEM G4 stereo transmitter
\n- 2 EK IEM G4 stereo receiver
\n- 2 IE 4 earphones
\n- 4 AA batteries
\n- rod antenna
\n- GA 3 rackmount set
\n- quick guide
\n- safety guide
\n- manufacturer declaration sheet
\n- power supply
\n
IEM Series Features
\n- Half-rack stereo transmitter in an all-metal housing with OLED display for full control
\n- Improved, easier and faster wireless synchronization between transmitter and receiver via new infrared backlit IR area that makes it more obvious where to hold the components for fast sync
\n- Compatible with Sennheiser WSM control software for flexible frequency allocation
\n- Up to 16 compatible channels
\n- Up to 42 MHz bandwidth with 1680 selectable frequencies, fully tunable in a stable UHF range
\n- Transmission range: up to 100 meters / 330 feet
\n- High RF output power (up to 50 mW, adjustable in three steps - 10/30/50) depending on country regulations.
\n
\n
\n
\n
SR IEM G4 Specifications
\n
- Frequency Range: 516 - 558 MHz
\n
- Receiving Frequencies:
\n- Max. 1680 frequencies, adjustable in 25 kHz steps
\n¬- 20 frequency banks, each with up to 16 factory-preset channels, no intermodulation
\n- 6 frequency banks with up to 16 programmable channels
\n
- Switching Bandwidth: up to 42 MHz
\n
- Nominal/Peak Deviation: ±24 kHz / ±48 kHz
\n
- MPX Pilot Tone (Frequency/Deviation): 19 kHz/±5 kHz
\n
- Frequency Stability: ±10 ppm
\n
- Antenna Output: BNC socket, 50 O
\n
- RF Output Power At 50 O Switchable:
\n- Low: typ. 10 mW
\n- Standard: typ. 30 mW
\n- High: typ. 50 mW
\n
- Compander System: Sennheiser HDX
\n
- AF Frequency Response: 25 Hz to 15 kHz
\n
- AF Input:
\n- BAL AF IN L (I) + MONO/
\n- BAL AF IN R (II)
\n- 2x XLR-3/¼" (6.3 mm) jack combo socket, electronically balanced
\n
- Max. Input Level: +22 dBu
\n
- Total Harmonic Distortion (THD): <0.9 %
\n
- Signal-to-Noise Ratio (At Nominal Load And Peak Deviation): >90 dB
\n
- AF Output:
\n- LOOP OUT BAL L (I)/LOOP OUT BAL R (II)
\n- ¼" (6.3 mm) stereo jack socket, balanced
\n
- Temperature Range: -10 °C to +55 °C
\n
- Power Supply: 12 V DC
\n
- Current Consumption: max. 350 mA
\n
- Dimensions: Approx. 202 x 212 x 43 mm
\n
- Weight: Approx. 980 g
\n
\n
EK IEM G4 Specifications
\n
- Frequency Range: 516 - 558 MHz
\n
- Receiving Frequencies:
\n- Max. 1680 frequencies, adjustable in 25 kHz steps
\n- 20 frequency banks, each with up to 16 factory-preset channels, no intermodulation
\n- 6 frequency banks with up to 16 programmable channels
\n
- Switching Bandwidth: up to 42 MHz
\n
- Nominal/Peak Deviation: ±24 kHz / ±48 kHz
\n
- Receiver Principle: Adaptive diversity
\n
- Sensitivity (With HDX, Peak Deviation): < 4 µV, typ. 1.6 µV for 52 dBA rms S/N
\n
- Adjacent Channel Selection: Typically = 65 dB
\n
- Intermodulation Attenuation: Typically = 70 dB
\n
- Blocking: = 80 dB
\n
- Squelch: 5 to 25 dBµV, adjustable in steps of 2 dB
\n
- Pilot Tone: Squelch (can be switched off)
\n
- Compander System: Sennheiser HDX
\n
- Signal-To-Noise Ratio (1 mV, peak deviation): approx. 90 dBA
\n
- Total Harmonic Distortion (THD): = 0.9 %
\n
- Output Power At 2.4 V, 5 % THD, Nominal Deviation: 2 x 100 mW at 32?
\n
- High Boost: +8 dB at 80 kHz
\n
- Limiter: -18 dB to -6 dB, adjustable in steps of 6 dB, can be switched off
\n
- Temperature Range: -10 °C to +55 °C
\n
- Power Supply: 2 AA batteries, 1.5 V or BA 2015 accupack
\n
- Nominal Voltage: 3 V battery / 2.4 V rechargeable battery
\n
- Current Consumption at Nominal Voltage: approx. 140 mA with transmitter switched off: = 25 µA
\n
- Operating Time: approx. 4 to 6 hours (depending on volume level)
\n
- Dimensions: Approx. 82 x 64 x 24 mm
\n
- Weight (incl. batteries): approx. 125 g
\n
\n - Dimensions and Weight in Packaging
\n - Band A (516-558 MHz)
\n - Shipping Weight: 6.5 lbs
\n - Shipping Dimensions: 16 x 14 x 3 in
\n - Manufacturer Part Number (MPN): 509614
\n - Band A1 (470-516 MHz)
\n - Shipping Weight: 6.5 lbs
\n - Shipping Dimensions: 16 x 14 x 3 in
\n - Manufacturer Part Number (MPN): 509613
\n - Band G (566-608 MHz)
\n - Shipping Weight: 6.5 lbs
\n - Shipping Dimensions: 16 x 14 x 3 in
\n - Manufacturer Part Number (MPN): 509615
\n
